The engine is an important part of the car and needs professional care. Regular washing is one of those procedures that extends the life of the engine.
If you have ever wondered about engine washing, it is one of the services included in the list of car detailing services offered throughout Tallinn. In fact, the process of washing your car’s engine is an important part of regular maintenance that helps to keep it running and extend its lifespan. While many car owners try to avoid this process for fear of damaging electrical components or injection systems, a properly performed wash procedure can be safe and effective. In this article, we will go over the general process of engine washing with you
General process for washing a car engine
- Preparation: Before starting, the car must be cooled down. For this purpose, it is recommended to perform the procedure in the evening or morning when the engine has cooled down after idling for some time. It is also recommended to disconnect the minus terminal from the battery to avoid short-circuiting the electrical components.
- Electronics protection: In order to prevent moisture penetration into electrical components and fuel injection systems, it is necessary to protect the relevant areas with plastic bags or other protective materials. This is particularly important in the case of high-pressure deep washing.
- Detergent application: A special detergent is applied to a cold engine to help dissolve and remove soot, dirt and oil deposits. The detergent is applied evenly over the entire surface and left for several minutes.
- Mechanical cleaning: Once the detergent has been applied to the surface of the engine, mechanical cleaning is started. This can be done with a soft brush, wipes or special tools for removing embedded dirt and grime.
- Rinsing: After a thorough mechanical cleaning, the engine is rinsed with clean water under low pressure. This removes detergent residue and dirt, leaving the surface dry and clean.
- Drying: After rinsing, the engine must dry completely before restarting. To speed up the drying process, you can use compressed air or simply let the engine dry naturally for several hours.
It is important to remember that the procedure must be done carefully and with the necessary precautions to avoid damaging electronics and other sensitive components. It is best to perform the flushing under the supervision of an experienced technician or follow the manufacturer’s instructions.
Of course, you can also do it yourself, but certain precautions must be taken to avoid damage to electronics and other sensitive components.