Car polishing is an important stage of car body care, which helps to restore its original shine and protect it from external influences. The car becomes more presentable, as if it just came from the showroom. Find out more about car polish on https://glassfix.ee/en/poleerimine_/ right now to find the right solution. Let’s consider the main features of this option in more detail.
Preparation for car polishing
It is important to properly prepare for the work. Among the most important points:
- Cleanliness. Before polishing, wash the car thoroughly. Use car shampoo to remove various contaminants. Do not forget to clean the wheels and arches.
- Drying. After washing, dry the body with a soft microfiber towel to avoid water stains.
- Inspection. Check the surface for scratches, dents and other damage. This will help determine which areas require special attention.
Thanks to such preparation, the work will be of high quality. Pay attention to each stage to prevent complications.
Features of choosing a polishing paste
There are different types of polishing pastes: abrasive, polishing and protective. The choice depends on the specific condition of the coating. For fairly large scratches, it is better to use an abrasive paste, and for light abrasions, a polishing paste. For manual polishing, you need soft applicators, and for machine polishing, polishing machines with various attachments.
The polishing process
It consists of several important stages. Let’s consider each of them in more detail:
- Applying the paste. Apply a small amount of paste to the applicator or pad of the polishing machine. Avoid excessive amounts to prevent the formation of excess debris.
- Polishing. Work on small areas (approximately one square meter). Move in circular or linear movements, without applying too much pressure. This will help prevent overheating, as well as damage to the varnish.
- Control of the result. Do not forget to check the result on a small area to make sure that you achieve the desired effect.
All these stages will be really easy to complete if you follow the technology. You will achieve the desired results of the work without complications. After polishing, remove any remaining paste with a clean microfiber. This will prevent streaks. It is recommended to apply a protective coating (wax or sealant) to prolong the polishing effect and protect the surface from external factors. It is better to polish at least once a year, depending on the operating conditions of the car!