• Before making car repair, it must be cleaned in advance of pollution, and also thoroughly washed; • Before performing repair work, which directly related to the process of removing various units of the machine, you need to take measures for reliable fixation of the car itself. In one place, for this, special stops are adjusted directly under the wheels;
• When carrying out the analysis of the units, it is impossible to avoid important details, as well as damage to the surfaces that have already passed the processing process. Both disassembly and assembly of units should be done exclusively by special devices. The whole process should take place only in a clean room;
• In order to remove pulleys, bearings and gears, you need to use only pullers or press;
• after disassembly has occurred, the details themselves must be washed either in diesel fuel or in kerosene, and you can dry them with a blowing with dry compressed air;
• All nuts and bolts in which a torn thread was discovered must be replaced by new. You can simply purchase a large number of parts for MAZ by going to the Productsmost-Sredniy-Maz site;
• It is necessary to quite meticulously inspect all the bearings, while paying additional attention to the condition in the state of their treadmills, as well as rollers;
• in any case, the ring rings should be replaced, in which cuts, cracks, as well as wear of the working edge were discovered;
• Details that were received in order to replace more obsolete and worn, it is necessary to clean the lubricant in which the part was in the preservation, and all the surfaces that are subjected to friction must be lubricated with the necessary lubricants.