There are situations how the Dead Battle Can Not Start the Engine, and You do not know What to do do. It is Possible to Start the Car from An External Source, and How to this Will Consider in this Article.
The Choice of Wires for Cigarette Lighter Battle
The Best Option is a Thick Cigarette Lighter Wire. In General, You Can Pick Up on the Volume of Your Engine, For Example, IF Its Volume of 1.5 Liters – The Best Option Woold Be a Wire In 16 Squares, this is ABOUT 4.5 mm in Diameter, and Even Better, If the Wire Diameter Is 9.5 mm. This kind of wire is enunch for mostern car.
The Wire Should Be Copper and the Insulation SHOULD BE Soft and Strong So that Wire Wire Get Hardined in the Cold. One Option for Insulation Is Silicone. Do Not Forget to Solder the Ends of the Wire to the Alligator Clips, As Usual Crimping Is Not Enure. The Length of the Wires, On Average, Shoup Be ABOUT 1.5 – 2 Meters.
Unplug Power Consumers
If you do not have a tire and tires, Turn Off the Ignition and Turn Off ALL of the Power Consumers in the Car. The first Thing to do is to connect the terminals “+”. Always Attach The Car Foursst to the Positive Terminal of a Discharge Battle.
That it is necessary to connect the about Cable to the Minus of the Charged Battle and To the Ground of the Car That Cannot Be Started. Never Connect it to the Car Battle When The Battle Is Dead. Do Not Forget that when You Connect the Contacts There Will Be a Spark.
Starting The Vehicle with a Charged Battle
It is Required to Start The Car, with a Charged Battle and Let it Idle for A Few Minutes. The fact is that dead Battle Will Feed the Energy from the Charged One, and When The Donor Works, The Second Battle Will Be Recharted. NEXT, Press The Accelerator Pedal So that Engine Speed is ABOUT 2000 RPM. You can start the car with a Dead Battle Next.
Before Removing the Terminals, Cars Shoup Run for a Few Minutes to Allow The Batteries to Charge. Remove Wires in the Reverse Order of when You Plugged them in.
ALSO, You NEED to Turn On Consumers in A Car with A Bad Battle to Get Rid of High Voltage Spikes. Do Not Turn on the Headlights, As the Bulbs Can Out During This Spike.